We got the valves all mounted up on the frame now. Before I had brackets to keep them mounted which did the job but since we are going for a clean look this fits the task. I am still debating whether to polish or powdercoat the big red valves, either way it will look better than the current color of pink.The four holes in the bar is to fit the hard lines through to fit into the back valves. We should have some hard lines in place in the next few weeks.
Here is a picture of the rear to show you the access through the rear bar.Here is a before picture of what the air bag would look like with the stock mounts. As you can see it really covers up a lot of the bag. I am going to get polished air bags so we want to show off the polished airbags. As I found out later on the shop that intially put these bags in put them in upside down, with many other shady things they did......Laser cut 3/8" steel odd to hold that in place, we got a local shop to cut these up since ART mounts wouldn't hold the proper amount of weight. It is clean and simple.Here is the how it will sit with the new mounts on. You can see the bag so much better now.

We reinforced the frame with angle iron, because of the weight issue that could arrise down the road. We haven't figured out yet were the valves will be placed because we are going to hard line the whole setup.


Had to remove the front mounts because we want to expose the airbag more and also have a better relocation places for the valves and hard lines.